Catcher thumb brace

[dishinstaler]

I am looking for a brace for a cather's thumb to protect from bending backwards. I have seen catchers on tv using them, but I cannto find where to purchase or get manufactured

[hiddengem]

I am looking for a brace for a cather's thumb to protect from bending backwards. I have seen catchers on tv using them, but I cannto find where to purchase or get manufactured

Guys in pro ball and probably college as well have thumb braces made to fit their thumb. They use a material that when soaked in hot water and then rapped around the thumb dries into a cast like material. This way it is a perfect fit for the individual. Hope this helps.

[catcher5]

I am looking for a brace for a cather's thumb to protect from bending backwards. I have seen catchers on tv using them, but I cannto find where to purchase or get manufactured

Hey how are you,
I have been playing baseball for 15 years, the last 4-5 years I have been catching. Although the thumb brace sounds like an ideal plan for a young catcher, however, that could not be the necessary fix. I have had my share of bent thumbs, and bruised palms due to catching. There are battin type gloves out there called Palmgaurds. they are slipped on the hand, and worn under the cathers mit. They have extra paddin and support. But before all that, examine the way your catcher is holding his/her hand. Make sure that the thumb is pointing down, this way if the ball does jerk the mit back, the thumb wont bend, it will curl. That is something that goes un-noticed. Let me know how it works.
Good luck.

[wjhiraldo]

what materials are used and where can i get them????

[hellborn]

I am looking for a brace for a cather's thumb to protect from bending backwards. I have seen catchers on tv using them, but I cannto find where to purchase or get manufactured
I have an Easton catcher's mitt with a plastic tube built right in that protects the thumb...works really well. I have no idea if something like this is still sold. My Easton is a pretty nice mitt all around.

[onbaseball]

Not sure where to find a thumb guard, as I haven't used one in 25 years of catching.

However I suggest that catchers learn to catch the ball with the thumb pointed down, as expressed previously, especially on inside pitches that tend to do the jamming.

Also, find an Akadema "Reptilian" catcher's glove and see if you like the fit on your hand. It's designed in such a way that places your thumb in a safe spot inside the mitt, and the outside thumb padding has a break / hinge, which "gives" when the ball hits and forces the ball into the pocket (most mitts have one long continuous thumb pad, so that when the tip gets hit, it bends your thumb back). I've not seen anything else like it, and wish I had one of these gloves twenty -five years ago.

[HammeRDrop]

I've been looking all over the net for this reptilian, but I have had no such luck. If anyone has a link I would greatly appreciate it :)

[irmobaseball]

this might help :

http://funtasticsports.com/shop_by_position/shop_position_catchers.htm

[onbaseball]

I've been looking all over the net for this reptilian, but I have had no such luck. If anyone has a link I would greatly appreciate it :)

Check out my site --- onbaseball.com --- there is a review of the Reptilian catcher glove and the pix link to the purchase page on Amazon.

[farrelldoc]

I've been looking all over the net for this reptilian, but I have had no such luck. If anyone has a link I would greatly appreciate it :)

I found the catcher's glove you are speaking of on this site:

http://www.a2zsportsdirect.com/akadema-baseball.html

One of the players on my select team uses it, and I'm thinking of getting one for my son, who has broken his thumb three times this season but won't wear a brace.

[CoachHenry]

But before all that, examine the way your catcher is holding his/her hand. Make sure that the thumb is pointing down, this way if the ball does jerk the mit back, the thumb wont bend, it will curl. That is something that goes un-noticed. Let me know how it works.
Good luck.

I agree with checking technique. However at some point mistakes are made, you are out of position, etc. My son sprained his thumb and it caused us to do two things. First, someone here linked us to how to make a homemade brace. Sadly I've lost the link. Second, we corrected his technique.

[JeepTJ12]

I believe we use thermoplast. Soak it in hot water and form it to your hand. Almost like a mouth guard. I don't like the bracing b/c it's hard to use the thumb to stick the ball. You don't have any feeling which causes the ball to pop out. However, everyone is different.

[MrSurprise]

I catch at the collegiate level now and I had that same problem, especially since these pitchers had really good sinkers and 2 seam fastballs. Some of the things I have done to correct it is you wear your catchers mitt like an outfielders glove... you put your pinky and ring finger in the last hole and move all the other fingers over... when you do this untie the thumb strap. Now when you catch the ball always keep your hand making a C towards the pitcher, and always catch the ball thinking about getting your thumb under the ball. The main thing that helped was just untieing the thumb strap. When I did this it allowed my thumb to make that C shape instead of being pushed out and down in the exact position that causes your thumb to get jammed...

[farrelldoc]

I agree with checking technique. However at some point mistakes are made, you are out of position, etc. My son sprained his thumb and it caused us to do two things. First, someone here linked us to how to make a homemade brace. Sadly I've lost the link. Second, we corrected his technique.
Here is an article of how to make a hard thumb:

http://propitchinglessons.com/id12.html

[Drill]

I've been looking all over the net for this reptilian, but I have had no such luck. If anyone has a link I would greatly appreciate it :)

http://www.akademapro.com/


http://img.photobucket.com/albums/v709/Drill_U/mitt.jpg

the above is a Akadema APM-41 Precision Kip Series 33" Baseball Catcher's Mitt.... i think i found it for around $139.00

THERE are many places on the net to buy akadema gloves.

my son has the glove above. give it time to break in before game ready


drill

[catchallday]

Here is an article of how to make a hard thumb:

http://propitchinglessons.com/id12.html

If you're not much of a do-it-yourself-er, or just plain dangerous with a skillet, you can try a pre-made version called the Thumz Up. I got mine at achillesmed.com.

[MatthewD44]

Okay bring this thread back... I have a question about thumb position. My son suffered this season with a bruised thumb but got through it with the use of a palmguard glove but I want to make sure that I am teaching him to hold his glove correctly. Could someone point me to a picture of the glove in the correct position?

[StraightGrain11]

Okay bring this thread back... I have a question about thumb position. My son suffered this season with a bruised thumb but got through it with the use of a palmguard glove but I want to make sure that I am teaching him to hold his glove correctly. Could someone point me to a picture of the glove in the correct position?

How's this? I may have more, give me a few min to check...

[MatthewD44]

That sorta shows it but if you have a clearer one I would be greatly appreciative

[StraightGrain11]

That sorta shows it but if you have a clearer one I would be greatly appreciative

Clearer than that!? Hmm....I think you will be hard-pressed to find one "clearer", but I will see what I can do...
Here's another one I found. But first understand, you do not catch all pitches the same! Here, the catcher is "adjusting" to catch a pitch low/away.

[MatthewD44]

Okay that one I can see what you were talking about.. the thumb is down. Okay, now I have got it.. THANK YOU very much for the extra time putting on the pictures...

[bullfrog35]

I understand the thumb down concept every time my son hurt his thumb this year was when he had to reach out on the glove side what do you suggest for that

[beisbolcrazy22]

With that picture of the A's catcher. Anyone know the make of those leg guards?

[ralanprod]

With that picture of the A's catcher. Anyone know the make of those leg guards?

I think those are Easton Stealths